Straight Thread Tee
Straight Thread Tee
Emmco's straight thread tees are used wherever you need a tee connection. These connectors can be ordered with additional porting for gauges, pilot lines, etc. The optional base plate can be welded in place for easy installation.

Emmco Part # Thread SEA# Dimensions
A B C D E F G H I
STT-4*-** 7/16"-18 4 1.750 1.500 .750 1.500 1.000 1.250 1.000 .172 .500
STT-6*-** 9/16"-18 6 2.000 2.000 1.000 2.000 1.500 1.500 1.500 .281 .500
STT-8*-** 3/4"-16 8 2.500 2.000 1.050 2.000 1.500 2.000 1.500 .281 .500
STT-10*-** 7/8"-14 10 2.500 2.500 1.250 2.500 1.875 1.875 1.875 .328 .625
STT-12*-** 1-1/16"-18 12 3.000 3.000 1.500 3.000 2.375 2.375 2.375 .328 .625
STT-16*-** 1-5/16"-12 16 3.250 3.000 1.625 3.000 2.625 2.375 2.375 .328 .625
STT-20*-** 1-5/8"-12 20 3.500 3.500 1.750 3.500 2.875 2.875 1.315 .406 .625
STT-24*-** 1-7/8"-12 24 4.000 3.500 2.000 3.500 2.875 3.375 2.875 .406 .625
STT-32*-** 2-1/2"-12 32 4.500 4.500 2.250 4.500 3.875 3.875 3.875 .406 .625
* Material: S-Steel A-Aluminum ** Optional Base Plate: BP

Back to the Top
Flange Port Connector
Flange Port Connector
Emmco's flange port connectors are designed to allow for quick and economical means of plumbing two four bolt flange connections together. Simply put the Flange Port Connector in place and fasten with standard split flanges. Orientation of components is not limited to 90 degree increments. Orings supplied in Viton material.

Code 61 Emmco Part # SAE Size Dimensions
A B C D
3000 P.S.I. Flange Port Connector
FPC-8-61 1/2" 3.000 .600 1.188 .840
FPC-12-61 3/4" 3.000 .742 1.500 1.054
FPC-16-61 1" 3.500 .957 1.750 1.315
FPC-20-61 1-1/4" 3.500 1.160 2.000 1.660
FPC-24-61 1-1/2" 4.000 1.338 2.380 1.900
FPC-32-61 2" 4.000 1.687 2.810 2.375
2500 P.S.I Flange Port Connector
FPC-40-61 2-1/2" 5.000 2.500 3.312 2.875
2000 P.S.I Flange Port Connector
FPC-48-61 3" 5.500 2.900 4.000 3.500
Back to the Top
Welded Pipe Fittings and Assemblies
  • Low Pressure up to 6"
  • Pipe Bending up to 2"
  • Bolt Together Piping Systems
  • Use for Pressure or Return Headers
  • Use for Central Hydraulic Systems

Specialized Fittings
Emmco, Inc. offers a variety of fittings to facilitate your plumbing needs. These fittings are intended to reduce the number of leak points along with providing ease of installation
Back to the Top

 
Back Home  |  Specialized Fittings  |  Hydraulic Power Units  | Accumulator Stands  |  Pump Motor Skids |  Valve Stands  |  Contact/Request Info
questions or comments regarding this site to webmaster@emmcoinc.net Copyright © 2000Emmco Inc.